EASY TO INSTALL
The newly redesigned ATC is truly a plug-and-play system with very few tools needed for installation. Everything plugs into the Control Unit – the ATC Keypad, Relay Module for the pump, and the Trim Tab Manual Control.
EASY TO OPERATE
Take your boat out and get it up on plane. Then press the two “Set Zero” buttons (Sun and Moon buttons) on the ATC Keypad until the blue LED flashes rapidly. Turn on the ATC and it “remembers” the right attitude and automatically adjusts your trim tabs. The ATC will deactivate if you touch your trim tab controls or if you press the “on/off” button on the ATC keypad.
EASY TO CHOOSE
No matter what Bennett Trim Tab System you have, we offer an Auto Tab Control System that will work for you. The AC3000 series works with our Rocker Switch, Single Lever and Racing Type Controls. The AC3EIC series works with the Electronic Indicator Control. See below for all system options.
BENEFITS FOR YOU:
- Saves you money on fuel
- Easy to install – just plug and play!
- No more guesswork – it trims the boat better than you can
- The most comfortable ride you’ve ever had on your boat
THREE MAIN COMPONENTS:
- A: ATC Keypad — The ATC Keypad enables you to turn the ATC system ON and OFF, and set the Zero Point for your boat’s best running attitude. The up and down arrows will flash showing trim tab adjustments. Keypad size is 2” x 2 ¾”.
- B: ATC Control Unit — The ATC Control Unit is a sophisticated processor and attitude sensor. It analyzes and calculates attitude readings. It “learns” and stores the characteristics of your boat in its memory and uses this information for precise trim tab corrections. Control Unit size is 3” x 4.5”.
- C: Relay Module — The Relay Module Links the Hydraulic Power Unit to the Auto Tab Control system.
