Every incoming message is identified and new messages are read from the high-contrast 4.5" LCD display, no paper is required. However, you can print out the message via a PC.
The NX300 consists of the compact, waterproof display and an H-Field Loop antenna. You can also use the NX300 as a nav repeater, by using its NMEA0183 port to connect it to your GPS or DGPS receiver.
NX300 Features
- Digital Navtex Receiver - No Paper Required
- 518 kHz and 490 kHz Reception - 200-400nm Range From Coast Station*
- 132 Message (Avg.) / 28,000 Character Memory Strorage Capacity
- Optimum Station Selection Based Upon Position (*L/L Required)
- GPS NMEA 0183 L/L Position / SOG / COG / BTW Data Repeater
- RS-232 Data Output To Personal Computer & Printer
- H-Field Antenna For Enhanced Reception (No Ground Required)
- 3 Modes: Message Selection, Message Display, Nav Data Display
- 15 Message Categories - User Selectable / Customized
- Low Power Consumption & Memory Back-Up w/Lithium Battery
- Display 4.5" (95 x 60 mm) Monochrome LCD,120 x 64 pixels
- Display Modes Message Selection Mode,NAV Data Mode,Message Display Mode
- Message Storage 28,000 Characters
- Languages Menu in English, Spanish, German, French, Italian, Danish, Dutch, Portuguese
ENVIRONMENT (IEC 60945 test method)
Temperature
Display unit: -15°C to +55°C
Antenna unit: -25°C to +70°C
Waterproofing
Display unit: IPX5 (IEC 60529), CFR-46 (USCG)
Antenna unit: IPX6 (IEC 60529)
Power Supply 12 - 24 VDC, 1.7 W max
