They are “3-stage” electronic, completely automatic, lightweight, silent, battery chargers and each output produces 12 Volts DC at either a full 5 Amps or 10 Amps (model specific), while using much less AC current than other charger types.

Unlike automotive “trickle” chargers, the 2613A, will not boil off the electrolytes in properly installed and maintained batteries. When the charger is attached to your batteries and plugged into a standard 115 Volt / 60 Hz AC outlet, the red and green LED’s, mounted on the face of the charger let you know the unit is recharging and maintaining your batteries.

Ideal for recharging and maintaining the 12VDC batteries in your boat, electric vehicle or cart, ATV, snowmobile or motorcycle.

2613A Battery Charger Features

• Total Amps: 15Amps
• Number of Outputs: 3
• Amps per output: 5/5/5
• Battery System: 2-12V or 1-24V
• Output Voltage: 12VDC
• DC Output: 4' Cables with ring terminals
• Input Voltage: 100-130V AC/50-60Hz
• Input Connection: 6' AC Cord with Connect Charge plug
• Dimensions: 9.60" x 7.0" x 2.60"
• Ignition Protected
• Reverse Polarity Protected
• Short Circuit Protected
• 3-Stage Switching Electronic Circuit
• Maintenance Mode protects batteries during storage
• Fully Potted to Waterproof Electronics
• Vibration and Shock Protected
• Self-Protecting under extreme ambient conditions
• For Flooded, Gel and AGM Batteries
• 2 - Year Limited Warranty
• Lifetime Warranty Against Water Damage
• Meets all Guest Harsh Environment Guidelines