Ice Eater P250 unlike other de-icing units, requires no additional hardware in order to obtain the desired de-icing patern. Ice Eater is shipped complete with suspension lines. It can be taken out of the box, hung in place and plugged in. Ice Eater may be hung from a pier or boat. Two to three feet is the average operating depth.

Ice Eater P250 Features

• 1/25 H.P. energy efficient high quality motor
• 1.5 amps, 120 volt, one phase, 60 cycle.
• 25 foot quick change power cord.
• Two 25 foot x 3/8 hollow braided lines with shackles
• Environmentally friendly lubricate fluid
• Weight 30 pounds
• Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water. Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified.
• Motor shaft is 316 stainless steel, the best material for salt water application.
• Optional thermostat custom design turns Ice Eater on when needed. Ideal for unattended application.

*200 FT cord is only available for 230V unit.

Power House Ice Eater Comparison Chart
Ice Eater Model	Horse Power	Power Needed	Typical Thrust	De-ices Diameter of	Uses
P250	1/4 HP	115/230volts, 1.5/.7 amps single phase 50/60 cycle	20 lbs thrust or 300 GPM	Approx. 25’	De-icing individual boats & slips or light ice
P500	1/2 HP	115/230volts, 5.0/2.5 amps single phase 50/60 cycle	28 lbs. thrust or 1050 GPM	Approx. 40'	De-icing individual boats and single slips
P750	3/4 HP	115/230volts, 4.7/2.5 amps single phase 50/60 cycle	36 lbs. thrust or 1300 GPM	Approx. 60’	De-icing mid-sized boats and docks
P1000	1 HP	115/230volts, 7.0/3.5 amps single phase 50/60 cycle	42 lbs. thrust or 1500 GPM	Approx. 80’	De-icing large boats. Marinas, or to replace several smaller units