K-LINK shares up to three displays, radar, GPS, GPS compass and echo sounder using Ethernet network protocol. The radar image can be overlaid on the chart. Place displays in the cabin, upper decks, or wherever, and operate the system from any of these locations. Each display is a leading-edge Koden device, equipped with an independent highspeed CPU. Waypoints, marks and events can be stored in each device's memory. Various data can be shared between displays. Your life on the water is about to become even more fun and convenient!

The K-LINK system expands to an all-in-one navigation system. The basic system consists of a radar-plotter display, choice of radar antenna and GPS sensor. You can expand the system with the addition of an echo sounder unit, GPS compass and you can add up to three displays. Choose the networking combination that best suits your vessel.

• Dual Radar Screen: Display short range and long range in a dual-screen for simultaneous target capture. Gain, Anti-Sea Clutter, and Anti-Rain Clutter can be controlled individually.
• Semi 3-D Radar Display: Stronger signals are displayed longer, and weaker signals shorter, making it possible to confirm signal strength at a glance. The Mercatortype grid system provides a display similar to real-time perspective vision, making it easier to see closer targets.

Display Size: 7" Color LCD

Display Resolution: 480 x 640 Pixels

Antenna: 4kw Radome with 10M Cable

Range: 0.125 to 36 nm

GPS: 18 Channel

SBAS (WAAS/EGNOS) enabled

Sounder Module: Output 600w/1kw, 50/200 kHz

Power Supply: 10.8 to 31.2 VDC

Presentation Modes: Head-up, North-up, (South-up), Course-up, True Motion

Chart: C-Map NT Max C-Card  

RGD-600 Display

RB715A Radome Antenna

Radome Interconnect cable

KGPS-20A GPS Sensor

CVB20 Sounder Module

Power Cord

Manual