Incorporating a highly efficient spur gearbox, the ProSeries windlasses utilize smaller, but more powerful, permanent magnet motors with lower amp draw and smaller diameter wires than those required by series wound motors driving worm gearboxes.

Overall, this makes for a lighter, less costly, and easier one-piece installation requiring no disassembly or motor alignment.

Lewmar ProSeries Features

• All metal components are stainless steel - case, gypsy, chain stripper and control arm
• Direct replacement for Horizon 900 windlasses - exact same mounting hole pattern, but increased pulling power
• For Rope, or chain, or combination rodes (3-strand rope required)
• A clutch mechanism allows for emergency manual lowering
• Built-in emergency manual recovery system; uses a common 1/2" drive ratchet wrench such as Craftsman or Snap-on
• Footswitches and handheld remotes are available as additional control options; for dual control station installations it is most cost effective to use the1000h
• Permanent magnet motor: 1000h = 700 Watts
• 5 (Five) Year warranty (except 1 year on electrical components)
• Rope size 9/16"-5/8", Chain Size G4 or BBB 5/16"
• Power 12V
• Typical Max Pull (1000lb)

Specifications

Gypsy No Motor Power Typical Power Typical Max Pull Maximum Line Speed Working Load Normal Current Draw Typical Line Speed/min Weight Circuit Breaker 516 12V 700W 1000 105 250 50A 88 21 70A

Gypsy Number Chain Description Rope Description 516 5/16"G4 9/16-5/8" 3-strand and 8-plait(5/8 only)

Dimensions

A(in) B(in) C(in) 5 3/4 9 5/8 7

• 1000H Pro-Series
• Circuit Breaker
• 2-Direction Solenoid
• Guarded Rocker Switch
• Mounting Hardware
• Installation Wrench
• Manual and Installation Guide