Specifications
|
System
Model
|
Modules
Installed*
|
Maximum
OutputAmps
|
Max
Input Amps
@ 115/230 VAC
|
|
PTMS-12-100
|
3
|
100
@ 12 V
|
9
/ 18
|
|
PTMS-24-67
|
3
|
67
@ 24 V
|
9
/18
|
General System Specifications
Input Voltage/Frequency: 90-264 VAC, 47-63 Hz, single phase;
derate linearly
from 100% output @ 105 VAC to 80% output @ 90 VAC
Power Factor: .96-.99
Efficiency: 85 % typical
Temperature Compensation (Option): - 5 mV per cell per
°C (typical)
Temperature Rating: 0-60° C; derate linearly from 100%
output @ 50° C to 80% output @ 60° C
Recommended Battery Type/Capacity: Gel-Cell, Flooded or
Sealed Lead-Acid;
12 Volt Systems: 6 Cell, 80-400 A-H (per
installed module); 240-1200 A-H (per system)
24 Volt Systems: 12 Cell, 40-200 A-H
(per installed module); 120-600 A-H (per system)
Output Battery Banks: 3
Module Bays: 3*
Status Indicators: Output OK, No Output, Check System,
Battery Too Hot, Total Output Bar Graph, Output Voltage Test Points,
Contacts for Optional Remote Alarm
Case Material: Powder Coated Stainless Steel
* Note: Charge modules are shipped in the same carton as the PTM
case and are then placed in position by the installer. Blanking
plates cover unused module bays.
