| Target symbols | Sleeping, activated, selected, dangerous and lost. |
| Target information | AIS vectors, safety critical data and full AIS data. |
| Collision avoidance | Safe zones and safety messages. |
| Alarms | Local alarm messages, lost targets |
| Waypoints | 1200 waypoints entered via cursor, lat/lon, range and bearing from present position or at boat’s position. 16 character name can be assigned. Waypoint symbols and groups Additional storage available on CompactFlash cards. |
| Waypoint Transfer | Waypoints database via NMEA and CompactFlash cards. Software also available to convert waypoints to Excel file. |
| Man Overboard (MOB Mode) | Mark placed with course line; readout shows range, bearing, lat/lon of MOB and time elapsed since MOB. |
| Screen functions | Full, half and quarter screens available dependant on function. Also 3 window page with 2 x 1/4 page windows and 1 x 1/2 page window. |
| Cartography | Navionics Charts on CompactFlash cards Chart of the world built in. |
| Chart scaling | 1/32nm (if cartographic detail is available to 4000nm). |
| Presentation Modes | Head up, Course up or North up (selectable True or Mag-netic). Relative, Autorange or True Motion. Screen offset. Radar or 3D synchronization. |
| Routes | A route plan may contain up to 50 waypoints. Up to150 routes can be stored in the units internal memory. Additional storage available on CompactFlash cards. SmartRoute to create a route from track history. |
| Track History | 10 tracks with up to 1000 points in each can be stored in the units internal memory. Track optimization reduces number of points used or user selectable time or distance interval. Additional storage available on CompactFlash cards |
| Radar/Chart overlay | Radar image can be overlaid on all screen charts. |
| Radar/Chart synchronization | To synchronize radar range and chart scale |
| 3D/Chart synchronization | To synchronize 3D and 2D chart scales and orientation. |
| Aerial overlay | Overlay of aerial photograph on the chart |
| AIS overlay | Switch AIS symbols on/off. Display heading/speed vectors and ROT. View detailed AIS data, safety critical target data, ALR and SRM messages. Set up a safe zone. |
| Navigation information | Own boats position in lat/lon, XTE, TTG and SOG/COG selectable. Bearing and distance to waypoint. Bearing and distance to cursor and ETA. |
| Cartography | Navionics Charts on CompactFlash cards Chart of the world built in. |
| 3D Presentation Modes | Active motion mode, planning mode, Adjust rotation and pitch, port, starboard, forward and aft view, multiple views, Vessel offset |
| 3D Display | Declutter, Transducer cone, Depth scale, Waypoint name, Adjust exaggeration, 3D view locator |
| Transducer | Transom-mount, in-hull or thru-hull options |
| Receiver Type | Patented Raymarine HD Digital receiver technology |
| Power output | Dependant on Digital Sounder Module |
| Frequency | Dependant on Digital Sounder Module |
| Alarms | Fish alarm, fish alarm depth, shallow and deep fish limit |
| A-Scope Display | Displays Sonar Returns in real time |
| Bottom Coverage Display | Shows the diameter of the transducer beam where it meets the bottom. |
| Bottom Lock | Displays echoes directly above the bottom. |
| Range markers | Easily see how far the boat is from a target on the echo sounder screen |
| Target Detection | Sonar fish echo with target depth readout |
| Zoom | 2,3,4x and user programmable Zoom scales |
| Data Display Capabilities | Chartplotter, Fishfinder, Radar, External Video (x4), CDI(Course Deviation Indicator), and customizable Data Bar display |
| Dimensions | 14”X 10.4”X 5.5” (356 x 264 x 140mm) |
| Display (LCD) size | 12.1" |
| Display colors | 256 |
| Display resolution | 800 x 600 pixels (SVGA) |
| Display type | Ultra Bright Sunlight viewable color TFT LCD |
| Mounting Methods | Bracket or console Mounting hardware included |
| Operating and non operating temperature limits | 14°F to 122°F (-10°C to 50°C) |
| Power consumption | 32 Watts |
| Voltage range | 10.7–32 volts (12/24v nominal) |
| Waterproofing | CFR46/IPX6 standards |
| Weight | 16.2lbs (7.35kg) |
| Approvals CE - conforms to FCC - compliant with | Essential requirements of 1995/5/EC, 1989/336/EC. CFR47 Parts 2 & 80 |
| Mounting | Either trunnion bracket or flush mount option |
| Humidity limit | up to 95% at 35°C non-condensing |
| Display Windows | Chart, Radar, Fishfinder, CDI, Video, Data, Weather and Engine Monitor. |
| Illumination | Screen and keypad: 0 to 100% in 64 steps Day/Night Mode |
| Languages | The selection available will vary according to your location. |
| System Alarms | Alarm clock, Anchor, Arrival, Deep depth, MOB, Offtrack, Shallow depth, Temperature, Timer |
| Navigation Alarms | Arrival alarm, offtrack XTE alarm. |
| Data Pages | 5 pages available. Pre-defined (Navigation, Waypoint, Route, Fishing or Sailing) or user-configured. |
| Data available | Vessel position, active waypoint, TTG, VMG - Waypoint, depth, COG SOG, heading, speed, set/drift, trip, log, ground log, ground trip, rudder, local time and date, sea temperature, app wind, true wind, VMG wind, ground wind XTE,compass,locked heading, way |
| Engine Pages | 5 pages available. Pre-defined (engine, engine and fuel, fuel resources, engine and resources, twin engines or triple engine support) or user-configured. |
| Engine Data available | Tacho, boost pressure, alternator, oil pressure, coolant temperature, engine hours, fuel level (tanks 1 & 2), fuel rate, total fuel, load. |
| Network Configurations | Single, dual or multiple display configurations. |
| SeaTalkhs Network | Supports 8 devices/displays - Optional network switch required |
| NMEA 0183 Input | GLL, GGA, GLC, GTD, VTG, BWC, BWR, RMA, RMB, RMC, XTE, VHW, HDG, HDM, HDT, DBT, DPT, APB, VLW, MWV, WPL, RTE, DSC and ZDA. Selectable to 4800, 4800 Navtex, 9600 Navtex or 38,400 AIS |
| NMEA Output - User selectable | APB, BWC, BWR, DBT, DPT, GGA, GLL, MTW, RMA, RMB, RMC, RSD, TTM, VLW, VHW, VTG, WPL, VHF/DSC and ZDA |
| SeaTalk Input | Depth,SOG,COG, Position, Waypoint number, range/ bearing, TTG, Boat speed, Time, XTE, Heading, Wind, data, Log/Trip, Pilot status, Temperature, MOB and cursor position |
| SeaTalk Output | Cursor data, guard zone and navigational data bridged from NMEA |
| SeaTalk2/NMEA2000 | 1 port Also supports SeaTalkng (Next Generation data bus) connectivity. Adapter cables required for SeaTalkng and NMEA2000 |
| Video Input | 4 composite video (NTSC or PAL) inputs (BNC connector) or 2 S-Video inputs using an optional cable |
| Video Output | VGA 9 pin sub D connector |
| Alerts | Incoming message (selectable categories) |
| Message List | Sorting |
| Range Scales (Range Rings) | 1/8 (1/16)nm to 72 (12) nm dependant on scanner Performance limited by scanner type and position. |
| Range Ring Accuracy | Better than +/- 1.5% of the max. range scale in use, or 22m (72 ft.), whichever is the greatest. |
| Bearing accuracy | +/- 1° |
| Variable Range Markers | 2 x VRM’s, readout nm, sm, km |
| Electronic Bearing Lines | 2 x EBL’s, floating if required, resolution 1° |
| Bearing scale | 360° graduated at 10° intervals 2° small ticks 10° large ticks |
| Minimum range | 23m (25 yds) |
| Range Discrimination | 23m (25 yds) |
| Presentation Modes | Head up, Course up or North up (selectable True or Mag-netic) Relative or True Motion |
| Scanner Control | Interference rejection, standby/transmit modes, pulse selection, Tune, Rain, FTC and Sea controls, with selection of manual or automatic control of gain, sea clutter and tune (Auto GST) |
| Compass Input | NMEA 0183 (required for fast heading data, suitable for MARPA), or SeaTalk |
| Waypoint Display | Create waypoints and target waypoint displayed with User control of symbols and groups |
| MARPA | Manual acquisition of 10 targets, automatic tracking, dangerous target alarms, safe zone, target history, true or rela-tive vectors, CPA graphics and indication of target speed/ course, bearing/ range, CPA and TCPA. |
| Guard Zone Alarm | 2 guard zones, selectable sensitivity level, audible alarm |
| Automatic Tuning | Auto control of gain, sea clutter and tune. |
| Off Center function | In Relative Motion, 1/3 or |
| Wakes | 10s, 30s, 1 min, 5 min, 10 min, OFF |
| Target Expansion | Operator selectable with 2 levels available, OFF |
| Timed TX | Rotation periods: 10, 20 or 30 scans Repetition periods: 3, 5, 10 or 15 minutes |
| AIS overlay | Switch AIS symbols on/off. Display heading/speed vectors and ROT. View detailed AIS data, safety critical target data, ALR and SRM messages. Set up a safe zone. |
| Type | SIRIUS Marine Weather |
| Weather elements | Storm cast, waves, Canadian radar, lightning, wind, sea sur-face temperature, surface observations stations, city weather, NOWRad, storm tracks, surface pressure. |
| Animated weather graphics | Weather forecast, weather radar history |
| Weather reports | Tropical statements, marine warnings, marine zone fore-casts, marine watchbox. |
