Permanently installed and fully enclosed, this is a drive system that delivers the convenience and performance of an inboard autopilot. Gone are the obstructive and untidy belts and wires of conventional wheel autopilots. The S1 Wheel pilot system is a patented solution that gives you a wheel drive that you can engage or disengage at the kick of a lever. A rear-mounted plug enables the drive unit to be detached for service or security reasons, without disturbing the wiring harness.

Raymarine S1 Wheel Pilot Features

• Convenient wheel mounted cockpit autopilot for sailing vessels
• Fully enclosed MkII wheel-drive delivers below deck autopilot performance
• Simple clutch engagement mechanism
• Easy-to-install
• Remotely mounted ST6002 control head
• The ST6002 repeats up to 15 pages of user-defined navigation data from Raymarine SeaTalk instruments and/or NMEA 0183 compatible devices

TECH TIP

Remember when determining your vessel displacement always add 20% to the dry weight of your vessel to account for the added weight of fuel, gear, provisions and people.

ST6002+ Specifications   Connections SeaTalk, NMEA 0183 Dimensions width: 110 mm (4.33 in)height: 115 mm (4.53 in)depth: 41 mm (1.62 in) Environmental Waterproof to CFR46 Keypad Eight button illuminated keypad Liquid Crystal Display (LCD) Displays heading, locked course and navigational data, data pages. Three brightness levels + off Operating Temperature Control Unit:0 °C to +70 °C (32 °F to 158 °F)

Mk II Wheel Drive Specs   Drive Unit Dimensions outer diameter: 361 mm (14.2 in) depth: 171 mm (6.7 in) (without spoke clamps) Environmental waterproof to CFR46 Helm speed 9 rpm (designed for systems with 1–3.5 turns lock to lock) Operating Temperature Drive unit: 0 °C to +60 °C (32 °F to 140 °F)

S1 Core Pack Specs   Connections SeaTalk, NMEA 0183 Drive motor output 6 Amps (15 amps peak) Environmental Drip resistant when mounted vertically Fluxgate Compass Included Inputs fluxgate compass, external GyroPlus yaw sensor, rudder position sensor, NMEA 0183, SeaTalk and power Interfaces NMEA 0183 and SeaTalk Operating temperature -10°C to 55°C (14°F to 131°F) Outputs NMEA 0183 (x1), SeaTalk (x2), drive motor, drive clutch Power 12 V DC Power Consumption Note: reduced voltages will severely degrade drive performance. Power Consumption Standby: 0.72 WAuto: 10 W at 25% duty cycle(depending on boat trim, helm load and sailing conditions) Rudder Reference Rotary Rudder Reference Transducer Included. (Required for proper pilot operation.)