The Type 1 hydraulic drive is compatible with both S1/S1G and S2/S2G corepacks. Use the table below to determine the Type 1 hydraulic drive's capacity when used with each corepack.
Type 1 Hydraulic Pump and Corepack Application Table
Corepack Used
- S1, S1G and X Series
- Ram Capacity 4.9in3– 10.5in3 (80cc – 172cc)
- Maximum Stall Pressure at 12V 750psi (50bar)
- Peak Flow Rate (no load) 67in3/min (1000cc/min)
- S2 or S2G
- Ram Capacity 4.9in3– 14in3 (80cc – 230cc)
- Maximum Stall Pressure at 12V 750psi (50bar)
- Peak Flow Rate (no load) 67in3/min (1000cc/min)
