Actisense Engine Management Unit Analog - NMEA2000
Display Larger Image (pop-ups must be allowed)
Our Price 
$451.95 
List Price $518.08

Actisense Engine Management Unit Analog - NMEA2000

Availability: Usually ships within 24 hours
Free Shipping
Free Shipping Free Shipping Available
List Price $518.08
Our Price 
$451.95 
Engine Management Unit Analog - NMEA2000
Share engine information on the NMEA 2000® bus...

The Actisense EMU-1 is a specialised analogue to NMEA 2000 Gateway which converts data from analogue engine senders into NMEA 2000. The EMU-1 enables NMEA 2000 display devices to monitor the engine on a vessel.

The EMU-1 has a PC based configuration tool that allows the settings inside the EMU-1 to be changed to best suit the engine it is working with, making it a flexible solution for many engine makes and models. Capable of measuring a wide range of engine parameters, the EMU-1 reports how the engine is operating and shares the information across the network.

Designed to simplify the conversion of analogue engine parameters (e.g. Temperature, pressure and RPM) into NMEA 2000 engine PGNs, the EMU-1 simplifies processes and reduces the number of input/output wires required at each engine. Additionally, the EMU-1 also supports the conversion of analogue transmission parameters and battery status to the associated NMEA 2000 PGN's.

The two-part screw terminal connection system allows for an easy pluggable connection to an engine wiring harness.

Multiple engines are supported by the setting of the engine instance using the EMU-1 configuration tool. Currently one EMU-1 per engine is supported. Support for multiple engines on a single EMU-1 is currently planned as a future firmware update.

The customised case ensures that the electronics are sealed while allowing quick access to the electrical connections.

It is recommended that an Actisense NGT-1 NMEA 2000 PC Interface is available for every EMU-1 installation. The NGT-1 can be used to update the Firmware, connect the Configuration Tool and display data on a PC for diagnostic and information purposes, using NMEA Reader. Please visit the NGT-1 page for product details.

Features:
  • 6 gauge inputs
  • 4 alarm inputs
  • 2 tacho inputs
  • Logs total engine time using the tacho inputs
  • 2 auxiliary inputs for additional flexibility
  • Simple single wire gauge connections; common ground referenced
  • Manual measurements not required when configuring
  • Firmware can be updated over NMEA 2000 network
  • Easy customisation for different installations (requires an NGT-1 and PC software)
  • Waterproof electronics and splash-proof connections
  • Pluggable connectors for quick and easy installation
  • Optional DIN rail mounting kit available
Actisense NGT-1-USB NMEA 2000 - PC USB Interface
Star Price$218.95
Actisense NGT-1-USB NMEA 2000 - PC USB Interface
MFG: NGT-1-USB

NGT-1-USB NMEA 2000 - PC USB Interface

NGT-1-USB is the standard option - USB interface for …

Free Shipping Free Shipping Available
MFG: NGT-1-USB
Star Price$218.95
Actisense NGT-1-ISO NMEA 2000 - PC Interface
Star Price$189.95
Actisense NGT-1-ISO NMEA 2000 - PC Interface
MFG: NGT-1-ISO

NGT-1-ISO NMEA 2000 to PC Interface

NGT-1 is a more specialist option and is used as a …

Free Shipping Free Shipping Available
MFG: NGT-1-ISO
Star Price$189.95
Actisense NMEA0183 Buffer with 6 ISO-Drive Outputs
Star Price$331.95
Actisense NMEA0183 Buffer with 6 ISO-Drive Outputs
MFG: NBF-3
NMEA0183 Buffer with 6 ISO-Drive Outputs

Safely drive up to six NMEA Listeners, with power distribution …
Free Shipping Free Shipping Available
MFG: NBF-3
Star Price$331.95
Actisense NMEA0183 Data Combiner w/RS232
Star Price$322.95
Actisense NMEA0183 Data Combiner w/RS232
MFG: NDC-4
NMEA0183 Data Combiner w/RS232

Flexible multiplexing w/preconfigured version for Autoswitching or AIS …
Free Shipping Free Shipping Available
MFG: NDC-4
Star Price$322.95
Actisense NMEA AIS Configured Multiplexer
Star Price$322.95
Actisense NMEA AIS Configured Multiplexer
MFG: NDC-4-AIS
NMEA AIS Configured Multiplexer

Flexible multiplexing w/preconfigured version for Autoswitching or AIS …
Free Shipping Free Shipping Available
MFG: NDC-4-AIS
Star Price$322.95
Actisense NMEA Autoswitch
Star Price$322.95
Actisense NMEA Autoswitch
MFG: NDC-4-ASW
NMEA Autoswitch
Preconfigured Autoswitch Mode

Autoswitch Mode: Intelligent …
Free Shipping Free Shipping Available
MFG: NDC-4-ASW
Star Price$322.95
Actisense NDC-4 USB Cable Upgrade Kit
Star Price$21.95
Actisense NDC-4 USB Cable Upgrade Kit
MFG: NDC-4-USBKIT
NDC-4 USB Cable Upgrade Kit

Flexible multiplexing w/preconfigured version for Autoswitching or AIS …
MFG: NDC-4-USBKIT
Star Price$21.95
Actisense NMEA0183 to NMEA2000
Star Price$186.95
Actisense NMEA0183 to NMEA2000
MFG: NGW-1-ISO
NMEA0183 to NMEA2000
Hook up to NMEA 2000 whilst keeping currently installed NMEA 0183 devices...
Free Shipping Free Shipping Available
MFG: NGW-1-ISO
Star Price$186.95
Actisense NMEA0183 to NMEA2000 AIS Configured
Star Price$189.95
Actisense NMEA0183 to NMEA2000 AIS Configured
MFG: NGW-1-ISO-AIS
NMEA0183 to NMEA2000 AIS Configured

Hook up to NMEA 2000 whilst keeping currently installed NMEA 0183 …
Free Shipping Free Shipping Available
MFG: NGW-1-ISO-AIS
Star Price$189.95
Actisense NMEA0183 to SeaTalk NG Gateway
Star Price$215.95
Actisense NMEA0183 to SeaTalk NG Gateway
MFG: NGW-1-STNG
NMEA0183 to SeaTalkNG Gateway

Hook up to NMEA 2000 whilst keeping currently installed …
Free Shipping Free Shipping Available
MFG: NGW-1-STNG
Star Price$215.95
Actisense NMEA0183 to NMEA2000 with USB
Star Price$218.95
Actisense NMEA0183 to NMEA2000 with USB
MFG: NGW-1-USB
NMEA0183 to NMEA2000 with USB

Hook up to NMEA 2000 whilst keeping currently installed NMEA 0183 …
Free Shipping Free Shipping Available
MFG: NGW-1-USB
Star Price$218.95
Actisense OPTO-4 Isolated NMEA to RS232 Adapter
Star Price$95.95
Actisense OPTO-4 Isolated NMEA to RS232 Adapter
MFG: OPTO-4
OPTO-4 Isolated NMEA to RS232 Adapter
Isolate an RS232 (PC) port to protect against ground …
MFG: OPTO-4
Star Price$95.95
Actisense Quick Network Block Central Connector
Star Price$157.95
Actisense Quick Network Block Central Connector
MFG: QNB-1
Quick Network Block Central Connector
Fault-free, NMEA 2000® backbone connections...

The …
MFG: QNB-1
Star Price$157.95
Actisense Quick Network Block Central Connector with Micro-C
Star Price$175.95
Actisense Quick Network Block Central Connector with Micro-C
MFG: QNB-1-PMW
Quick Network Block Central Connector with Micro-C

Fault-free, NMEA 2000® backbone …
MFG: QNB-1-PMW
Star Price$175.95
Actisense USG-2 Isolated USB To Serial Gateway
Star Price$128.95
Actisense USG-2 Isolated USB To Serial Gateway For Use with NMEA0183,RS422 and RS232
MFG: USG-2
USG-2 Isolated USB To Serial Gateway For Use w/NMEA0183,RS422 And RS232

The USG-2 converts a USB port …
MFG: USG-2
Star Price$128.95
Actisense DIN Rail Mounting Kit
Star Price$8.95
Actisense DIN Rail Mounting Kit
MFG: DIN-KIT-2
DIN Rail Mounting Kit

DIN rail mounting kit for use with USG-2.
MFG: DIN-KIT-2
Star Price$8.95
Actisense PRO-BUF-1 Professional
Star Price$647.95
Actisense PRO-BUF-1 Professional NMEA 0183 Buffer
MFG: PRO-BUF-1-BAS-S
PRO-BUF-1 Professional NMEA 0183 Buffer

Adaptable NMEA 0183 Buffer with two OPTO-isolated inputs and …
Free Shipping Free Shipping Available
MFG: PRO-BUF-1-BAS-S
Star Price$647.95
Actisense Small Boat N2K Network Kit
Star Price$80.95
Actisense Small Boat N2K Network Kit
MFG: A2K-SBN-1

Small Boat N2K Network Kit

Installing compact sized NMEA2000 networks is now quicker and …

MFG: A2K-SBN-1
Star Price$80.95
Actisense Rib Starter Kit N2K
Star Price$116.95
Actisense Rib Starter Kit N2K
MFG: A2K-RSK-1

Rib Starter Kit N2K

An ideal solution for RIB users that wish to install an 2000® …

MFG: A2K-RSK-1
Star Price$116.95

Write A New Review

Actisense Engine Management Unit Analog - NMEA2000 has not been reviewed yet. Review Now.
Engine Management Unit Analog - NMEA2000
Share engine information on the NMEA 2000® bus...

The Actisense EMU-1 is a specialised analogue to NMEA 2000 Gateway which converts data from analogue engine senders into NMEA 2000. The EMU-1 enables NMEA 2000 display devices to monitor the engine on a vessel.

The EMU-1 has a PC based configuration tool that allows the settings inside the EMU-1 to be changed to best suit the engine it is working with, making it a flexible solution for many engine makes and models. Capable of measuring a wide range of engine parameters, the EMU-1 reports how the engine is operating and shares the information across the network.

Designed to simplify the conversion of analogue engine parameters (e.g. Temperature, pressure and RPM) into NMEA 2000 engine PGNs, the EMU-1 simplifies processes and reduces the number of input/output wires required at each engine. Additionally, the EMU-1 also supports the conversion of analogue transmission parameters and battery status to the associated NMEA 2000 PGN's.

The two-part screw terminal connection system allows for an easy pluggable connection to an engine wiring harness.

Multiple engines are supported by the setting of the engine instance using the EMU-1 configuration tool. Currently one EMU-1 per engine is supported. Support for multiple engines on a single EMU-1 is currently planned as a future firmware update.

The customised case ensures that the electronics are sealed while allowing quick access to the electrical connections.

It is recommended that an Actisense NGT-1 NMEA 2000 PC Interface is available for every EMU-1 installation. The NGT-1 can be used to update the Firmware, connect the Configuration Tool and display data on a PC for diagnostic and information purposes, using NMEA Reader. Please visit the NGT-1 page for product details.

Features:
  • 6 gauge inputs
  • 4 alarm inputs
  • 2 tacho inputs
  • Logs total engine time using the tacho inputs
  • 2 auxiliary inputs for additional flexibility
  • Simple single wire gauge connections; common ground referenced
  • Manual measurements not required when configuring
  • Firmware can be updated over NMEA 2000 network
  • Easy customisation for different installations (requires an NGT-1 and PC software)
  • Waterproof electronics and splash-proof connections
  • Pluggable connectors for quick and easy installation
  • Optional DIN rail mounting kit available

Write A New Review

Actisense Engine Management Unit Analog - NMEA2000 has not been reviewed yet. Review Now.

Actisense Top Sellers