Awlgrip Awl-Prep 400 T0170G
Display Larger Image (pop-ups must be allowed)
Our Price 
$39.95 
List Price $74.19

Awlgrip Awl-Prep 400 Gallon

Availability: Usually ships within 24 hours
List Price $74.19
Our Price 
$39.95 

Awlprep 400

Awlprep 400 is a general purpose, wipe down solvent used to wipe down final primed or topcoated surfaces before and after sanding, removing hand oils, light grease and other light surface contaminants. Recommended for use in warm weather.

  • Evaporates 5 times slower than T0008
  • Excellent for removing tape residue
  • Non-photochemically reactive

Surface Cleaning

A clean, dry surface is essential to the success of any coatings application. Our systems include products and procedures which will enable you to obtain proper surface conditions.

Remember – Clean before sanding. Sanding often melts grease, wax and oils into the surface making it impossible to obtain a clean surface.

Detergent Scrubbing
Many applicators scrub the surface they are going to paint with powdered household scouring cleanser and a 3M Scotch-Brite Pad before any other prep work is performed. This is an excellent practice as careful observation of the rinse water will tell you when you have a clean surface. Breaks, holes or beading of the rinse water indicates areas which need additional attention.

Two Cloth Cleaning Method
-The surface should be cleaned thoroughly of all dust, using a vacuum or clean dry compressed air to blow while wiping with clean, oil free, dry cotton cloths.
-Soak one cloth in Awlgrip Wipe-Down Solvent (NA/AP: Awlprep T0008, Awlprep Plus T0115 or Awlprep 400 T0170; EU: Surface Cleaner T0340). Use this cloth to wet the surface.
-Use a dry second cloth to wipe the surface dry and lift the contamination off the surface.
Work small areas (4 sq. ft or less) to keep the surface cleaner from drying before the second rag wipes it clean.
Repeat steps 2 and 3, changing rags frequently, until the surface is residue free.

Warning
Wiping the surface with one wet cloth only smears contamination around. Be sure the cloth used does not have any contaminates; clean cotton works the best. The surface must be dry before using tack rags.

Awlgrip Awl-Prep Surface T0008G
Star Price$44.95
Awlgrip Awl-Prep Surface Gallon
MFG: T0008G

Awl-Prep Surface Cleaner T0008

Awlprep is a fast evaporating, wipe down solvent used to remove oils, …

MFG: T0008G
Star Price$44.95
Awlgrip Awl-Prep Wax & Grease Remover Gallon
Star Price$47.95
Awlgrip Awl-Prep Wax & Grease Remover Gallon
MFG: T0115G

Awlprep Plus Wipe Down Solvent T0115

Awlprep Plus is a medium fast evaporating, wipe down …

MFG: T0115G
Star Price$47.95

Write A New Review

Awlgrip Awl-Prep 400 Gallon has not been reviewed yet. Review Now.

Awlprep 400

Awlprep 400 is a general purpose, wipe down solvent used to wipe down final primed or topcoated surfaces before and after sanding, removing hand oils, light grease and other light surface contaminants. Recommended for use in warm weather.

  • Evaporates 5 times slower than T0008
  • Excellent for removing tape residue
  • Non-photochemically reactive

Surface Cleaning

A clean, dry surface is essential to the success of any coatings application. Our systems include products and procedures which will enable you to obtain proper surface conditions.

Remember – Clean before sanding. Sanding often melts grease, wax and oils into the surface making it impossible to obtain a clean surface.

Detergent Scrubbing
Many applicators scrub the surface they are going to paint with powdered household scouring cleanser and a 3M Scotch-Brite Pad before any other prep work is performed. This is an excellent practice as careful observation of the rinse water will tell you when you have a clean surface. Breaks, holes or beading of the rinse water indicates areas which need additional attention.

Two Cloth Cleaning Method
-The surface should be cleaned thoroughly of all dust, using a vacuum or clean dry compressed air to blow while wiping with clean, oil free, dry cotton cloths.
-Soak one cloth in Awlgrip Wipe-Down Solvent (NA/AP: Awlprep T0008, Awlprep Plus T0115 or Awlprep 400 T0170; EU: Surface Cleaner T0340). Use this cloth to wet the surface.
-Use a dry second cloth to wipe the surface dry and lift the contamination off the surface.
Work small areas (4 sq. ft or less) to keep the surface cleaner from drying before the second rag wipes it clean.
Repeat steps 2 and 3, changing rags frequently, until the surface is residue free.

Warning
Wiping the surface with one wet cloth only smears contamination around. Be sure the cloth used does not have any contaminates; clean cotton works the best. The surface must be dry before using tack rags.

Write A New Review

Awlgrip Awl-Prep 400 Gallon has not been reviewed yet. Review Now.

Awlgrip Top Sellers