Balmar Alternator 70A 60-Series
Display Larger Image (pop-ups must be allowed)
Our Price 
$599.95 
List Price $686.59

Balmar 60-70DV Alternator 70A 12vDC Dual Foot

Availability: Usually ships within 24 hours
List Price $686.59
Our Price 
$599.95 

70A 60-Series Alternator 12vDC Dual Foot

Light-duty 6-Series Alternators are engineered to replace most OEM alternators on a wide variety of marine gasoline and diesel engines.

6-Series alternators provide a simple and effective tool for supporting upgraded battery systems and increased electrical loads. 6-Series alternators are available in three mounting configurations, which support four mounting styles; a 3.15” saddle mount that’s typical of Yanmar engines, a 4” J-180 mount, and a single foot mount that’s convertible to support 1” Motorola and 2” Delco style mounting configurations.

Model 60-70SV
Volts 12
Amps 70A
Mounting Style 3.15” I.D. Saddle

SmartReady Internal Regulation
A feature unique to the 6-Series alternator, SmartReady internal regulation enables the alternator to be used with smart Balmar external regulation, or as a stand-alone, internally regulated alternator system. The SmartReady regulator is a fixed, 14.1-volt charge controller that is ideal as a built-in back-up regulator for the cruiser, or as a fulltime regulator for systems where smart, multi-stage regulation is not required.

Alternator Style: Small case, positive field excitation (p-type)
Regulation: External p-type or internal Smart ReadyTM fixed voltage regulator
Case Construction: Ventilated cast aluminum / High-impact plastic rear cover
Finish: White powdercoating
Cooling: Dual internal fans
Bearings: Sealed ball bearing. Heavy duty radial (front). Heavy duty radial (rear)
Tensioning Arm: Five position crown; M8 x 1.25
Available Outputs: 70A/12V, 100A/12V, 120A/12V, 150A/12V, 70A/24V
Mounting Styles: 3.15” I.D. Saddle (Model 60), 4” I.D. Saddle (Model 604), 1” / 2” Single Foot (Model 6 21)
Mounting Foot Bore: (60/604) 8mm or 10mm; (621) 1” foot / ½”, 2” foot / 3/8”
Grounding: Dedicated terminal (case isolated). Stud dimensions: M8 x 1.25
Positive Output: Threaded stud. Stud dimensions: M8 x 1.25
Lamp Output: D+ (low voltage / low current) Stud dimensions: 10 x 24
AC/Stator Output: 12 pulse. Stator output wire included in pigtail plug.
Internal Voltage Regulation: 14.1-volt (12V). 28.2-volt (24V). Single stage regulation.
Normal/Maximum Operating Temperature: 180°F/82°C / 225°F/108°C
Low RPM Cut-In/Maximum Alternator RPM: 1320rpm / 15000rpm
Diodes +/-: 3 (positive), 3 (negative); 50-amp rated
Ignition Protection Rating: USCG Title 33, ISO J1187, SAE 8846, CE

Engine TypeBalmar Alternator Model
Bukh621, 71-Series *
CaterpillarOff Engine Only, Most Iso. Ground *
Chrysler60, 70, 621, 71-Series *
Crusader621, 71-Series * **
CumminsMounts vary by engine model.
Detroit Dsl.621, 712, 94 & 95-Series *
Flagship621, 71-Series *
GMC621, 71-Series *
Greymarine621, 71-Series *
Hawk Marine621, 71-Series *
Hino621, 71-Series *
Indmar621, 71-Series *
Isuzu621, 71-Series, some 60, 70-Series *
John Deere621, 71-Series, 604, 95, 97-Series *
Lehman (Ford)60, 621, 71-Series * ***
Lehman (Sabre)60-Series, requires tension arm mod.*
LuggerVaries by model * ****
MANNo standard *
Mercedes60, 70-Series (With Spacers) *
MercruiserVaries by model 60, 621, 712-Series *
Mitsubishi60, 70-Series (With Spacers) *
MTUNo standard *
Nanni60, 70-Series *
OMC621, 71-Series *
Pathfinder621, 712-Series * *****
Perkins 4107, 4108621, 712-Series *
Perkins (other)621, 71-Series * *****
Perkins-Volvo M60-Series (Isolated Ground)
Pleasurecraft621, 71-Series
Universal (Atomic)621, 712-Series *
Universal 30, 50621, 71-Series *
Vetus Denouden60, 70-Series *
Volvo 2001, 2003621, 712-Series *
Volvo Penta (gas)622-Series*
WesterbekeVaries 60, 70, 621, 71, 712-Series
Yanmar60, 70-Series, 621-Series (Some 6cyl.)

* Mounting configuration may vary by model and year. Follow directions for determining proper replacement alternator by visual inspection described on following page. Cat 3208 may use 8-Series alternator.
** Some Crusader models may require alternator with an offset tensioning arm.
*** Dual belt models will require special Lehman pulley with 3/8” spacing between belts.
**** May require Lugger mounting Kit.
***** Use original alternator pulley.
******Use 9mm x 4" pulley if belt is driven directly off of flywheel

Balmar 100A 60-100SV
Star Price$689.95
Balmar 60-100SV Alternator 100A 12vDC Dual Foot
MFG: 60-100SV

100A 60-Series Alternator 12vDC Dual Foot

Light-duty 6-Series Alternators are engineered to …

MFG: 60-100SV
Star Price$689.95
Balmar Alternator 60-120DV
Star Price$747.95
Balmar 60-120DV Alternator 120A 12vDC Dual Foot
MFG: 60-120DV

120A 60-Series Alternator 12vDC Dual Foot

Light-duty 6-Series Alternators are engineered to …

MFG: 60-120DV
Star Price$747.95
Balmar 120A Alternator Kit 12vDC
Star Price$914.95
Balmar 120A Alternator Kit 12vDC Dual Foot
MFG: 60-YP-120-SR-KIT

120A 60-Series Alternator 12vDC Dual Foot

Light-duty 6-Series Alternators are engineered to …

MFG: 60-YP-120-SR-KIT
Star Price$914.95
Balmar 70A Alternator Kit 12vDC Dual Foot
Star Price$763.95
Balmar 70A Alternator Kit 12vDC Dual Foot
MFG: 60-YP-70-SR-KIT

70A 60-Series Alternator 12vDC Dual Foot

Light-duty 6-Series Alternators are engineered to …

MFG: 60-YP-70-SR-KIT
Star Price$763.95
Balmar 621-100SV Alternator 100a
Star Price$670.95
Balmar 621-100SV Alternator 100a 12vDC Single Foot
MFG: 621-100SV

100A 621-Series Alternator 12vDC Single Foot

Alternator, 621 Series, 100A, 12V, Spindle …

MFG: 621-100SV
Star Price$670.95
Balmar Alternator 621-120DV 120a 12vDC
Star Price$747.95
Balmar 621-120DV Alternator 120a 12vDC Single Foot
MFG: 621-120DV

120A 621-Series Alternator 12vDC Single Foot

  • Alternator, 621 Series, 120A, 12V, …
MFG: 621-120DV
Star Price$747.95
Balmar Alternator 621-70SV 70A12DC
Star Price$624.95
Balmar 621-70SV Alternator 70a 12vDC Single Foot
MFG: 621-70SV

70A 621-Series Alternator 12vDC Single Foot

  • Alternator, 621 Series, 70A, 12V, …
MFG: 621-70SV
Star Price$624.95
Balmar 100Amp 621 Alternator Kit
Star Price$874.95
Balmar 100A 621 Alternator Kit 12vDC Single Foot
MFG: 621-VUP-100-SV

100Amp 621 Alternator Kit 12vDC Single Foot - 621-VUP-100SV-KIT

Light-duty 6-Series …

MFG: 621-VUP-100-SV
Star Price$874.95
Balmar 120A 621 Alternator Kit 12vDC
Star Price$906.95
Balmar 120A 621 Alternator Kit 12vDC Single Foot
MFG: 621-VUP-120-SR-KIT

120Amp 621 Alternator Kit 12vDC Single Foot - 621-VUP-120-SR-KIT

Light-duty 6-Series …

MFG: 621-VUP-120-SR-KIT
Star Price$906.95
Balmar 70A 621 Alternator Kit 12vDC Single Foot
Star Price$755.95
Balmar 70A 621 Alternator Kit 12vDC Single Foot
MFG: 621-VUP-70-SR-KIT

70Amp 621 Alternator Kit 12vDC Single Foot - 621-VUP-70-SR-KIT

Light-duty 6-Series …

MFG: 621-VUP-70-SR-KIT
Star Price$755.95

Write A New Review

Balmar 60-70DV Alternator 70A 12vDC Dual Foot has not been reviewed yet. Review Now.

70A 60-Series Alternator 12vDC Dual Foot

Light-duty 6-Series Alternators are engineered to replace most OEM alternators on a wide variety of marine gasoline and diesel engines.

6-Series alternators provide a simple and effective tool for supporting upgraded battery systems and increased electrical loads. 6-Series alternators are available in three mounting configurations, which support four mounting styles; a 3.15” saddle mount that’s typical of Yanmar engines, a 4” J-180 mount, and a single foot mount that’s convertible to support 1” Motorola and 2” Delco style mounting configurations.

Model 60-70SV
Volts 12
Amps 70A
Mounting Style 3.15” I.D. Saddle

SmartReady Internal Regulation
A feature unique to the 6-Series alternator, SmartReady internal regulation enables the alternator to be used with smart Balmar external regulation, or as a stand-alone, internally regulated alternator system. The SmartReady regulator is a fixed, 14.1-volt charge controller that is ideal as a built-in back-up regulator for the cruiser, or as a fulltime regulator for systems where smart, multi-stage regulation is not required.

Alternator Style: Small case, positive field excitation (p-type)
Regulation: External p-type or internal Smart ReadyTM fixed voltage regulator
Case Construction: Ventilated cast aluminum / High-impact plastic rear cover
Finish: White powdercoating
Cooling: Dual internal fans
Bearings: Sealed ball bearing. Heavy duty radial (front). Heavy duty radial (rear)
Tensioning Arm: Five position crown; M8 x 1.25
Available Outputs: 70A/12V, 100A/12V, 120A/12V, 150A/12V, 70A/24V
Mounting Styles: 3.15” I.D. Saddle (Model 60), 4” I.D. Saddle (Model 604), 1” / 2” Single Foot (Model 6 21)
Mounting Foot Bore: (60/604) 8mm or 10mm; (621) 1” foot / ½”, 2” foot / 3/8”
Grounding: Dedicated terminal (case isolated). Stud dimensions: M8 x 1.25
Positive Output: Threaded stud. Stud dimensions: M8 x 1.25
Lamp Output: D+ (low voltage / low current) Stud dimensions: 10 x 24
AC/Stator Output: 12 pulse. Stator output wire included in pigtail plug.
Internal Voltage Regulation: 14.1-volt (12V). 28.2-volt (24V). Single stage regulation.
Normal/Maximum Operating Temperature: 180°F/82°C / 225°F/108°C
Low RPM Cut-In/Maximum Alternator RPM: 1320rpm / 15000rpm
Diodes +/-: 3 (positive), 3 (negative); 50-amp rated
Ignition Protection Rating: USCG Title 33, ISO J1187, SAE 8846, CE

Engine TypeBalmar Alternator Model
Bukh621, 71-Series *
CaterpillarOff Engine Only, Most Iso. Ground *
Chrysler60, 70, 621, 71-Series *
Crusader621, 71-Series * **
CumminsMounts vary by engine model.
Detroit Dsl.621, 712, 94 & 95-Series *
Flagship621, 71-Series *
GMC621, 71-Series *
Greymarine621, 71-Series *
Hawk Marine621, 71-Series *
Hino621, 71-Series *
Indmar621, 71-Series *
Isuzu621, 71-Series, some 60, 70-Series *
John Deere621, 71-Series, 604, 95, 97-Series *
Lehman (Ford)60, 621, 71-Series * ***
Lehman (Sabre)60-Series, requires tension arm mod.*
LuggerVaries by model * ****
MANNo standard *
Mercedes60, 70-Series (With Spacers) *
MercruiserVaries by model 60, 621, 712-Series *
Mitsubishi60, 70-Series (With Spacers) *
MTUNo standard *
Nanni60, 70-Series *
OMC621, 71-Series *
Pathfinder621, 712-Series * *****
Perkins 4107, 4108621, 712-Series *
Perkins (other)621, 71-Series * *****
Perkins-Volvo M60-Series (Isolated Ground)
Pleasurecraft621, 71-Series
Universal (Atomic)621, 712-Series *
Universal 30, 50621, 71-Series *
Vetus Denouden60, 70-Series *
Volvo 2001, 2003621, 712-Series *
Volvo Penta (gas)622-Series*
WesterbekeVaries 60, 70, 621, 71, 712-Series
Yanmar60, 70-Series, 621-Series (Some 6cyl.)

* Mounting configuration may vary by model and year. Follow directions for determining proper replacement alternator by visual inspection described on following page. Cat 3208 may use 8-Series alternator.
** Some Crusader models may require alternator with an offset tensioning arm.
*** Dual belt models will require special Lehman pulley with 3/8” spacing between belts.
**** May require Lugger mounting Kit.
***** Use original alternator pulley.
******Use 9mm x 4" pulley if belt is driven directly off of flywheel

Write A New Review

Balmar 60-70DV Alternator 70A 12vDC Dual Foot has not been reviewed yet. Review Now.

CDI Electronics Top Sellers