NavPod PP4500-02 PowerPod Pre-Cut for Raymarine eS75/eS77/eS78
Display Larger Image (pop-ups must be allowed)
Our Price 
$253.95 
List Price $319.99

NavPod PP4500-02 PowerPod Pre-Cut for Raymarine eS75/eS77/eS78

Availability: Usually ships within 24 hours
List Price $319.99
Our Price 
$253.95 
PP4500-02 PowerPod Pre-Cut f/Raymarine eS75/eS77/eS78

PP4500 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.

The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.

PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.

The Hi-Gloss Material
  • NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.


The Waterproof Seal
  • All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.


The Nickel Chrome Plated Screws
  • We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!


The Manufacturing Process
  • Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.


Our Commitment to Quality
  • We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.
NavPod PP4402 PowerPod Raymarine e7 Series-PP4402 NavPod
Star Price$237.95
NavPod PP4402 PowerPod Raymarine e7 Series
MFG: PP4402
NavPod PP4402 PowerPod Raymarine e7 Series units. PowerPods are simply a better way to mount your Radar/Chartplotter, …
MFG: PP4402
Star Price$237.95
NavPod PP471C 4-Way Swivel PowerPod for Raymarine-PP471C NavPod
Star Price$252.95
NavPod PP471C 4-Way Swivel PowerPod for Raymarine
MFG: PP471C
NavPod PP471C 4-Way Swivel PowerPod for Raymarine 7" SL and RL series color displays. W x H x D: 10.25"x12.5"x8"
MFG: PP471C
Star Price$252.95
NavPod PP5203 PowerPod Precut for Raymarine C125/127 & E125/127
Star Price$419.95
NavPod PP5203 PowerPod Precut for Raymarine C125/127 & E125/127
MFG: PP5203
PP5203 PowerPod Pre-Cut for Raymarine c125/c127, e125/e127

PP5200 Series, PowerPods for Power are a …
MFG: PP5203
Star Price$419.95
NavPod PP4404 PowerPod Raymarine
Star Price$237.95
NavPod PP4404 PowerPod Pre-Cut for Raymarine a75/a77/a78
MFG: PP4404
PP4404 PowerPod Pre-Cut for Raymarine a75/a77/a78

PP4400 Series, PowerPods for Power are a better …
MFG: PP4404
Star Price$237.95
NavPod PP4814 PowerPod Pre-Cut for Raymarine a95/a97/a98
Star Price$339.95
NavPod PP4814 PowerPod Pre-Cut for Raymarine a95/a97/a98
MFG: PP4814
PP4814 PowerPod Pre-Cut for Raymarine a95/a97/a98

PP4800 Series, PowerPods for Power are a better …
MFG: PP4814
Star Price$339.95
NavPod PP5204 PowerPod Raymarine
Star Price$419.95
NavPod PP5204 PowerPod Pre-Cut for Raymarine a125/a127/a128
MFG: PP5204
PP5204 PowerPod Pre-Cut for Raymarine a125/a127/a128

PP5200 Series, PowerPods for Power are a better …
MFG: PP5204
Star Price$419.95
NavPod PP4101 PowerPod Precut f/Raymarine i70/ST60, Garmin GMI10,
Star Price$229.95
NavPod PP4101 PowerPod Precut f/Raymarine i70/ST60, Garmin GMI10, Furuno F150 or Simrad IS20
MFG: PP4101
NavPod PP4101 PowerPod Precut f/Raymarine i70/ST60, Garmin GMI10, Furuno F150 or Simrad IS20, see NavPod PP4101 …
MFG: PP4101
Star Price$229.95
NavPod PP5205 PowerPod Pre-Cut for Raymarine eS127 and eS128
Star Price$419.95
NavPod PP5205 PowerPod Pre-Cut for Raymarine eS127 and eS128
MFG: PP5205
PP5205 PowerPod Pre-Cut f/Raymarine eS127 and eS128

PP5200 Series, PowerPods for Power are a better …
MFG: PP5205
Star Price$419.95
NavPod PP4900-01 PowerPod Pre-Cut for Raymarine eS97/eS98
Star Price$347.95
NavPod PP4900-01 PowerPod Pre-Cut for Raymarine eS97/eS98
MFG: PP4900-01
PP4900-01 PowerPod Pre-Cut for Raymarine eS97/eS98

The PP4900 Series, PowerPods are a better option …
MFG: PP4900-01
Star Price$347.95

Write A New Review

NavPod PP4500-02 PowerPod Pre-Cut for Raymarine eS75/eS77/eS78 has not been reviewed yet. Review Now.
PP4500-02 PowerPod Pre-Cut f/Raymarine eS75/eS77/eS78

PP4500 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.

The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.

PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.

The Hi-Gloss Material
  • NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.


The Waterproof Seal
  • All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.


The Nickel Chrome Plated Screws
  • We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!


The Manufacturing Process
  • Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.


Our Commitment to Quality
  • We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

Write A New Review

NavPod PP4500-02 PowerPod Pre-Cut for Raymarine eS75/eS77/eS78 has not been reviewed yet. Review Now.

Navpod Top Sellers