NavPod PP4800-12 PowerPod Pre-Cut for Garmin 820/820XS/840/840XS/6008/6208 - Star Marine Depot
Display Larger Image (pop-ups must be allowed)
Our Price 
$352.95 
List Price $429.99

NavPod PP4800-12 PowerPod Pre-Cut for Garmin 820/820XS/840/840XS/6008/6208

Availability: Usually ships within 24 hours
List Price $429.99
Our Price 
$352.95 
PP4800-12 PowerPod Pre-Cut for Garmin GPSMAP® 820/820XS/840/840XS/6008/6208

PP4800 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.

The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.

PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.

GEN3 Features:

Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.

Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.

Nickel Chrome Plated Screws
NavPod uses all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!

Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. NavPod is fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. NavPod has re-designed and re-tooled all of the popular NavPods. NavPod has reviewed all of the former products and selected the best design elements of each and incorporated them in every Gen3 product.

Commitment to Quality
NavPod is committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, NavPod is confident you will have years of trouble free service and a long lasting high gloss finish.

Compatible Devices:
  • Garmin GPSMAP® 820, 820XS, 840, 840XS, 6008 and 6208
NavPod PP4802 PowerPod Garmin 4008-4208-PP4802 NavPod
Star Price$352.95
NavPod PP4802 PowerPod Garmin 4008-4208
MFG: PP4802
NavPod PP4802 PowerPod for Garmin 4008-4208 PowerPods are simply a better way to mount your Radar/Chartplotter, …
MFG: PP4802
Star Price$352.95
NavPod PP4401 PowerPod Garmin 700 Series-PP4401 NavPod
Star Price$245.95
NavPod PP4401 PowerPod Garmin 700 Series
MFG: PP4401
NavPod PP4401 PowerPod Garmin 700 Series 720 and 740 units. PowerPods are simply a better way to mount your …
MFG: PP4401
Star Price$245.95
NavPod PP4401 PowerPod Precut Garmin 720 740 - PP4401 NavPod
Star Price$245.95
NavPod PP4401 PowerPod Precut Garmin 720 740
MFG: PP4401
NavPod PP4401 PowerPod Precut Garmin 720 & 740. Dimensions: 10.875" W x 10" H x 7"D. NavPod Protects Your Electronics …
MFG: PP4401
Star Price$245.95
NavPod PP5056 PowerPod Garmin
Star Price$376.95
NavPod PP5056 PowerPod Precut for Garmin GPSMAP 6008 & 6208
MFG: PP5056
NavPod Part #:PP5056
Description:PowerPod, Precut for Garmin 6008 & 6208

NavPod …
MFG: PP5056
Star Price$376.95
NavPod PP5034 PowerPod Precut for Garmin GPSMAP 7012 & 7212
Star Price$434.95
NavPod PP5034 PowerPod Precut for Garmin GPSMAP 7012 & 7212
MFG: PP5034
PART #: PP5034
Description: PowerPod, Pre-cut for Garmin 7012/7212
W x H x D: 18" x 14.55" …
MFG: PP5034
Star Price$434.95
NavPod PP4811 PowerPod Garmin
Star Price$352.95
NavPod PP4811 PowerPod Pre-Cut for Garmin 8008/8208
MFG: PP4811
PP4811 PowerPod Pre-Cut for Garmin 8008/8208

PP4800 Series, PowerPods for Power are a better option …
MFG: PP4811
Star Price$352.95
NavPod PP5201 PowerPod Garmin
Star Price$434.95
NavPod PP5201 PowerPod Pre-Cut for Garmin 1020/1020xs/1040xs
MFG: PP5201
PP5201 PowerPod Pre-Cut for Garmin 1020/1020xs/1040xs

PP5200 Series, PowerPods for Power are a better …
MFG: PP5201
Star Price$434.95
NavPod PP4804 PowerPod - Precut for Garmin 5008/5208
Star Price$352.95
NavPod PP4804 PowerPod Precut f/Garmin GPSMAP 5008 & 5208
MFG: PP4804
Description: Pre-Cut NavPod Protects Your Electronics In Harsh Conditions, Pre-Cut For Garmin 5008/5208

20 …
MFG: PP4804
Star Price$352.95
NavPod PP5057 PowerPod Precut f/Garmin 4010 & 4210
Star Price$376.95
NavPod PP5057 PowerPod Precut f/Garmin 4010 & 4210
MFG: PP5057
PART #: PP5057
Description: PowerPod, Pre-cut for Garmin 4010/4210
W x H x D: 15.125" x …
MFG: PP5057
Star Price$376.95
NavPod PP5055 PowerPod Precut f/Garmin GPSMAP 5012 & 5212
Star Price$376.95
NavPod PP5055 PowerPod Precut f/Garmin GPSMAP 5012 & 5212
MFG: PP5055
NavPod PP5055 PowerPod Precut for Garmin GPSMAP 5012 & 5212, see NavPod PP5055 features below.
MFG: PP5055
Star Price$376.95
NavPod PP5032 PowerPod Precut f/Garmin GPSMAP 6012 & 6212
Star Price$434.95
NavPod PP5032 PowerPod Precut f/Garmin GPSMAP 6012 & 6212
MFG: PP5032
NavPod PP5032 PowerPod Precut for Garmin GPSMAP 6012 & 6212, see NavPod PP5032 features below.
MFG: PP5032
Star Price$434.95
NavPod PP4101 PowerPod Precut f/Raymarine i70/ST60, Garmin GMI10,
Star Price$237.95
NavPod PP4101 PowerPod Precut f/Raymarine i70/ST60, Garmin GMI10, Furuno F150 or Simrad IS20
MFG: PP4101
NavPod PP4101 PowerPod Precut f/Raymarine i70/ST60, Garmin GMI10, Furuno F150 or Simrad IS20, see NavPod PP4101 …
MFG: PP4101
Star Price$237.95
NavPod PP5035 PowerPod Pre-Cut for Garmin GPSMAP 4012/4212
Star Price$434.95
NavPod PP5035 PowerPod Pre-Cut for Garmin GPSMAP 4012/4212
MFG: PP5035
PP5035 PowerPod Pre-Cut for Garmin GPSMAP® 4012/4212

PP5030 Series, PowerPods for Power are a …
MFG: PP5035
Star Price$434.95
NavPod PP5050-19 PowerPod Pre-Cut for Garmin GPSMAP 7410, 7410xsv, 7610 & 7610xsv
Star Price$376.95
NavPod PP5050-19 PowerPod Pre-Cut for Garmin GPSMAP 7410, 7410xsv, 7610 & 7610xsv
MFG: PP5050-19
PP5050-19 PowerPod Pre-Cut f/Garmin GPSMAP 7410, 7410xsv, 7610 & 7610xsv

PowerPods are designed for the …
MFG: PP5050-19
Star Price$376.95
NavPod PP5200-12 PowerPod Pre-Cut for Garmin 7412, 7412xsv, 7612 & 7612xsv
Star Price$434.95
NavPod PP5200-12 PowerPod Pre-Cut for Garmin 7412, 7412xsv, 7612 & 7612xsv
MFG: PP5200-12
PP5200-12 PowerPod Pre-Cut f/Garmin 7412, 7412xsv, 7612 & 7612xsv

PP5200 Series, PowerPods for Power …
MFG: PP5200-12
Star Price$434.95
NavPod PP4800-20 PowerPod Pre-Cut for Garmin 7408/7408xsv/7608/7608xsv
Star Price$352.95
NavPod PP4800-20 PowerPod Pre-Cut for Garmin 7408/7408xsv/7608/7608xsv
MFG: PP4800-20
PP4800-20 PowerPod Pre-Cut for Garmin 7408/7408xsv/7608/7608xsv

PP4800 Series, PowerPods for Power are …
MFG: PP4800-20
Star Price$352.95
NavPod PP5065 PowerPod Pre-Cut for Garmin GPSMAP 8012/8212
Star Price$434.95
NavPod PP5065 PowerPod Pre-Cut for Garmin GPSMAP 8012/8212
MFG: PP5065
PP5065 PowerPod Pre-Cut for Garmin GPSMAP® 8012/8212

The PowerPods for Power are a better option …
MFG: PP5065
Star Price$434.95
NavPod PP4500-01 PowerPod Pre-Cut for Garmin echoMAP 72sv/73sv/74sv/75sv/72dv/73dv/74dv/75dv
Star Price$262.95
NavPod PP4500-01 PowerPod Pre-Cut for Garmin echoMAP 72sv/73sv/74sv/75sv/72dv/73dv/74dv/75dv
MFG: PP4500-01
PP4500-01 PowerPod Pre-Cut for Garmin echoMAP™ 72sv/73sv/74sv/75sv/72dv/73dv/74dv/75dv

PP4500 …
MFG: PP4500-01
Star Price$262.95

Write A New Review

NavPod PP4800-12 PowerPod Pre-Cut for Garmin 820/820XS/840/840XS/6008/6208 has not been reviewed yet. Review Now.
PP4800-12 PowerPod Pre-Cut for Garmin GPSMAP® 820/820XS/840/840XS/6008/6208

PP4800 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.

The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.

PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.

GEN3 Features:

Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.

Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.

Nickel Chrome Plated Screws
NavPod uses all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!

Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. NavPod is fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. NavPod has re-designed and re-tooled all of the popular NavPods. NavPod has reviewed all of the former products and selected the best design elements of each and incorporated them in every Gen3 product.

Commitment to Quality
NavPod is committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, NavPod is confident you will have years of trouble free service and a long lasting high gloss finish.

Compatible Devices:
  • Garmin GPSMAP® 820, 820XS, 840, 840XS, 6008 and 6208

Write A New Review

NavPod PP4800-12 PowerPod Pre-Cut for Garmin 820/820XS/840/840XS/6008/6208 has not been reviewed yet. Review Now.

Navpod Top Sellers