NavPod PP4814 PowerPod Pre-Cut for Raymarine a95/a97/a98 - Carbon Black
Display Larger Image (pop-ups must be allowed)
Our Price 
$339.95 
List Price $429.99

NavPod PP4814 PowerPod Pre-Cut for Raymarine a95/a97/a98 - Carbon Black

Availability: Usually ships within 24 hours
List Price $429.99
Our Price 
$339.95 

PP4811 PowerPod Pre-Cut for Garmin GPSMAP® 8008 & 8208 - Carbon Black


PP4800 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.

The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.

PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.

All PowerPods Include:

  • Acrylic capped ABS plastic
  • Chromed stainless steel tamper-poof fasteners
  • Double seal for watertight integrity
  • Models are available pre-cut for popular electronics
  • Swivel Base with large pass-through for wire harness

The Hi-Gloss Material

NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.

The Waterproof Seal

All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.

The Nickel Chrome Plated Screws

We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!

The Manufacturing Process

Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our Commitment to Quality

We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

NavPod PP4404 PowerPod Pre-Cut for Raymarine a75/a77/a78 - Carbon Black
Star Price$237.95
NavPod PP4404 PowerPod Pre-Cut for Raymarine a75/a77/a78 - Carbon Black
MFG: PP4404-C
PP4404 PowerPod Pre-Cut for Raymarine a75/a77/a78 - Carbon Black

PP4400 Series, PowerPods for Power are …
MFG: PP4404-C
Star Price$237.95
NavPod PP4900-01 PowerPod Pre-Cut for Raymarine es95/es97/es98 - Carbon Black
Star Price$347.95
NavPod PP4900-01 PowerPod Pre-Cut for Raymarine es95/es97/es98 - Carbon Black
MFG: PP4900-01-C

PP4900-01 PowerPod Pre-Cut f/Raymarine es95/es97/es98 - Carbon Black


The PP4900 …

MFG: PP4900-01-C
Star Price$347.95
NavPod PP4900-09 PowerPod Pre-Cut for Raymarine c95, c97, e95 & e97
Star Price$347.95
NavPod PP4900-09 PowerPod Pre-Cut for Raymarine c95, c97, e95 & e97
MFG: PP4900-09

PP4900-09 PowerPod Pre-Cut for Raymarine c95, c97, e95 & e97


The PP4900 Series, …

MFG: PP4900-09
Star Price$347.95
NavPod PP4900-09 PowerPod Pre-Cut for Raymarine c95, c97, e95 & e97 - Carbon Black
Star Price$347.95
NavPod PP4900-09 PowerPod Pre-Cut for Raymarine c95, c97, e95 & e97 - Carbon Black
MFG: PP4900-09-C

PP4900-09 PowerPod Pre-Cut for Raymarine c95, c97, e95 & e97 - Carbon Black


The …

MFG: PP4900-09-C
Star Price$347.95
NavPod PP5052 PowerPod Pre-Cut for Raymarine C90W/E90W - Carbon Black
Star Price$363.95
NavPod PP5052 PowerPod Pre-Cut for Raymarine C90W/E90W - Carbon Black
MFG: PP5052-C

PP5052 PowerPod Pre-Cut for Raymarine C90W/E90W - Carbon Black


PowerPods are …

MFG: PP5052-C
Star Price$363.95
NavPod PP5203 PowerPod Pre-Cut for Raymarine c125/c127 & e125/e127 - Carbon Black
Star Price$419.95
NavPod PP5204 PowerPod Pre-Cut for Raymarine a125, a127 & a128 - Carbon Black
Star Price$419.95
NavPod PP5204 PowerPod Pre-Cut for Raymarine a125, a127 & a128 - Carbon Black
MFG: PP5204-C

PP5204 PowerPod Pre-Cut for Raymarine a125, a127 & a128 - Carbon Black


PP5200 Series, …

MFG: PP5204-C
Star Price$419.95
NavPod PP5205 PowerPod Pre-Cut for Raymarine eS127/eS128 - Carbon Black
Star Price$419.95
NavPod PP5205 PowerPod Pre-Cut for Raymarine eS127/eS128 - Carbon Black
MFG: PP5205-C

PP5205 PowerPod Pre-Cut for Raymarine eS127/eS128 - Carbon Black


PP5200 Series, PowerPods …

MFG: PP5205-C
Star Price$419.95
NavPod PP5213 PowerPod Pre-Cut for Raymarine GS125
Star Price$419.95
NavPod PP5213 PowerPod Pre-Cut for Raymarine GS125
MFG: PP5213

PP5213 PowerPod Pre-Cut for Raymarine GS125


PowerPods are designed for the serious boater …

MFG: PP5213
Star Price$419.95
NavPod PP5213 PowerPod Pre-Cut for Raymarine GS125 - Carbon Black
Star Price$419.95
NavPod PP5213 PowerPod Pre-Cut for Raymarine GS125 - Carbon Black
MFG: PP5213-C

PP5213 PowerPod Pre-Cut for Raymarine GS125 - Carbon Black


PowerPods are designed for the …

MFG: PP5213-C
Star Price$419.95
NavPod PP5920-01 PowerPod Pre-Cut for Raymarine AXIOM PRO 16
Star Price$426.95
NavPod PP5920-01 PowerPod Pre-Cut for Raymarine AXIOM PRO 16
MFG: PP5920-01

PP5920-01 PowerPod Pre-Cut for Raymarine AXIOM PRO 16

PowerPods are better than bracket …

MFG: PP5920-01
Star Price$426.95
NavPod PP4800-07 PowerPod Pre-Cut for Raymarine AXIOM 9 (Pre-Cut for Surface Mount Using Rear Mounting Brackets, Requires Raymarine Right Angle Connector)
Star Price$339.95
NavPod PP4800-07 PowerPod Pre-Cut for Raymarine AXIOM 9 (Pre-Cut for Surface Mount Using Rear Mounting Brackets, Requires Raymarine Right Angle Connector)
MFG: PP4800-07

PP4800-07 PowerPod Pre-Cut for Raymarine AXIOM 9 (Pre-Cut for Surface Mount Using Rear Mounting Brackets, …

MFG: PP4800-07
Star Price$339.95

Write A New Review

NavPod PP4814 PowerPod Pre-Cut for Raymarine a95/a97/a98 - Carbon Black has not been reviewed yet. Review Now.

PP4811 PowerPod Pre-Cut for Garmin GPSMAP® 8008 & 8208 - Carbon Black


PP4800 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.

The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.

PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.

All PowerPods Include:

  • Acrylic capped ABS plastic
  • Chromed stainless steel tamper-poof fasteners
  • Double seal for watertight integrity
  • Models are available pre-cut for popular electronics
  • Swivel Base with large pass-through for wire harness

The Hi-Gloss Material

NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.

The Waterproof Seal

All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.

The Nickel Chrome Plated Screws

We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!

The Manufacturing Process

Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our Commitment to Quality

We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

Write A New Review

NavPod PP4814 PowerPod Pre-Cut for Raymarine a95/a97/a98 - Carbon Black has not been reviewed yet. Review Now.

Navpod Top Sellers