Marine Exhaust / Water Hose is reinforced with 2 or 4 plies of synthetic cord and is made of black, heavy-walled synthetic rubber. This hose is primarily used for straight connections in wet exhaust systems and engine water circulation lines. It is resistant to engine heat, exhaust fumes, ozone, mild chemicals, antifreeze and saltwater. This hose also has double the ozone resistance required by SAEJ2006. The temperature ranges from -20°F – + 200°F continuous, +250°F intermittent. The hose meets SAE J2006 Type R1 standards.
Designed to give Excellent Service for:
• Straight Pipe Connector Less than 4 x I.D. of Hose
Product can give Good service with proper installation, may not be suitable in all Applications:
• Straight Pipe Connector More than 4 x 1.D. of Hose
Not Recommended:
• Require Moderate Bend - Severe Bend
Marine Exhaust / Water Hose is reinforced with 2 or 4 plies of synthetic cord and is made of black, heavy-walled synthetic rubber. This hose is primarily used for straight connections in wet exhaust systems and engine water circulation lines. It is resistant to engine heat, exhaust fumes, ozone, mild chemicals, antifreeze and saltwater. This hose also has double the ozone resistance required by SAEJ2006. The temperature ranges from -20°F – + 200°F continuous, +250°F intermittent. The hose meets SAE J2006 Type R1 standards.
Designed to give Excellent Service for:
• Straight Pipe Connector Less than 4 x I.D. of Hose
Product can give Good service with proper installation, may not be suitable in all Applications:
• Straight Pipe Connector More than 4 x 1.D. of Hose
Not Recommended:
• Require Moderate Bend - Severe Bend