Shields Shieldsflex Hose Marine Water/Exhaust Hose 1 3/4in x 12.5 foot - Star Marine Depot
Display Larger Image (pop-ups must be allowed)
Our Price 
$80.95 
List Price $241.93

Shields Shieldsflex Hose Marine Water/Exhaust Hose 1 3/4in x 12.5 foot

Availability: Usually ships within 24 hours
List Price $241.93
Our Price 
$80.95 

Shieldsflex II Marine Water/Exhaust Hose has a black synthetic rubber tube and cover. It is reinforced with wire helix imbedded between plies of HD synthetic cord. It is resistant to exhaust fumes, ozone, mild chemicals, anitfreeze and saltwater. This hose is abrasion and odor permeation resistant. It now has double the ozone resistance required by the SAEJ2006.

Shieldsflex II is primarily used for engine intake, wet exhaust connections (use where bends or long lengths are required), bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holiding tank vent/pump out. The temperature ranges from -20° F – +200°F continuous, +250°F intermittent. The hose meets SAE J2006 Type R2 standards.

  • Straight Pipe Connector Less than 4 x I.D. of Hose
  • Straight Pipe Connector More than 4 x 1.D. of Hose
  • Require Moderate Bend

Product can give Good service with proper installation, may not be suitable in all Applications:

  • Severe Bend

Write A New Review

Shields Shieldsflex Hose Marine Water/Exhaust Hose 1 3/4in x 12.5 foot has not been reviewed yet. Review Now.

Shieldsflex II Marine Water/Exhaust Hose has a black synthetic rubber tube and cover. It is reinforced with wire helix imbedded between plies of HD synthetic cord. It is resistant to exhaust fumes, ozone, mild chemicals, anitfreeze and saltwater. This hose is abrasion and odor permeation resistant. It now has double the ozone resistance required by the SAEJ2006.

Shieldsflex II is primarily used for engine intake, wet exhaust connections (use where bends or long lengths are required), bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holiding tank vent/pump out. The temperature ranges from -20° F – +200°F continuous, +250°F intermittent. The hose meets SAE J2006 Type R2 standards.

  • Straight Pipe Connector Less than 4 x I.D. of Hose
  • Straight Pipe Connector More than 4 x 1.D. of Hose
  • Require Moderate Bend

Product can give Good service with proper installation, may not be suitable in all Applications:

  • Severe Bend

Write A New Review

Shields Shieldsflex Hose Marine Water/Exhaust Hose 1 3/4in x 12.5 foot has not been reviewed yet. Review Now.

Shields Marine Hose Top Sellers